| 名前 | 解説 | |
|---|---|---|
 | AddSpacingAfterLastLine | Gets or sets a value indicating whether the line spacing should be added after the last line of text. The default is false. |
| AlignmentDelayToSplit | Gets or sets a value indicating whether to delay full text alignment till when any of the Split* methods is called.
Do not use this property unless you are calling any of the Split* methods to render the text. |
| AllowOverhangingWords | Gets or sets a value indicating whether long words can overhang beyond the layout box bounds. The default is false. |
| AnchoredObjects | Gets the list of anchored objects. |
| BidiLevels | Gets the array with bidi levels of the code points. |
| CanSkipFirstLineWithIndentation | Gets or sets whether the whole first line of a paragraph with indentation can be skipped. The default is true. |
| ClusterMap | Gets the array mapping code points to glyphs. |
| CodePointCount | Gets the number of code points. |
| CodePointFlags | Gets the array of CodePointFlags, one for each code point. |
| CodePoints | Gets the array of UTF-32 characters (code points). Only the first CodePointCount elements should be taken into account. |
| ColumnWidth | Gets or sets the width of the layout box measured from the left margin (for positive values) or from the right margin (for negative values), in graphic units. |
| ContentHeight | Gets the height of the formatted text, in graphic units. |
| ContentHeightFitsInBounds | Gets a value indicating whether the height of the formatted text fits in the specified MaxHeight. |
| ContentHeightIncludingTrailingWhitespace | Gets the height of the formatted text, taking into account the trailing whitespace at the end of each line, in graphic units. |
| ContentRectangle | Gets the rectangle containing the formatted text, in graphic units. |
| ContentWidth | Gets the width of the formatted text, in graphic units. |
| ContentWidthFitsInBounds | Gets a value indicating whether the width of the formatted text fits in the specified MaxWidth. |
| ContentWidthIncludingTrailingWhitespace | Gets the width of the formatted text, taking into account the trailing whitespace at the end of each line, in graphic units. |
| ContentWithWhitespaceBounds | Get the rectangle of the formatted text, taking into account the trailing whitespace at the end of each line. |
| ContentX | Gets the X coordinate of the rectangle containing the formatted text, in graphic units. |
| ContentY | Gets the Y coordinate of the rectangle containing the formatted text, in graphic units. |
| DefaultFormat | Gets the default text format for the current text layout. |
| DefaultTabStops | Gets or sets the spacing between the default tab stops, in graphic units. |
| DelimiterCharCode | Gets or sets a UTF-32 character code used as a delimiter that signals the beginning of the portion of text to be preserved (for text trimming). |
| DelimiterCharCount | Gets or sets the delimiter count, counting from the end of the text, to preserve text from (for text trimming). |
| EllipsisCharCode | Gets or sets a UTF-32 code of the omission sign (ellipsis character) for text trimming.
Setting this property to 0 prevents the ellipsis character from showing. |
| FirstLineIndent | Gets or sets the indent of the first line after paragraph separator, in graphic units. |
| FirstLineIsStartOfParagraph | Gets or sets a value indicating whether the first line of text is the start of paragraph. The default is true. |
| FlowDirection | Gets or sets the flow direction (how lines of text are placed relative to one another). |
| FontCollection | Gets or sets the custom font collection used for searching fonts and font fallbacks. |
| FontFallbackScope | Gets or sets a value specifying the scope for searching fallback fonts for the glyphs missing in the font defined in TextFormat. |
| FontScaleFactor | Gets or sets the uniform scale factor for all fonts used in the current text layout.
Valid values are from 0.001 to 1000. The default is 1. |
| Formats | Gets the array of TextFormat objects, one for each code point. |
| GeneralCategories | Gets the array with general classification of the code points. |
| GlyphCount | Gets the number of resulting glyphs. |
| GlyphLinkedList | Gets the linked list with each glyph info. |
| GlyphRunMap | Gets the array mapping code points to glyph runs. |
| HonorIdeographicBaseline | Gets or sets a value indicating whether the ideographic baseline should be used instead of the Roman baseline for hieroglyph characters. The default is false. |
| HonorLastLineSpacing | Gets or sets a value indicating whether line spacing for the last line is considered a part of the layout content. The default is false. |
| HonorTrailingLineBreak | Gets or sets a value indicating whether the trailing line break causes a blank line to be added to the output text layout. The default is false. |
| InlineObjects | Gets the list of inline objects. |
| Inlines | Gets the list of inline elements derived from Inline, such as TextRun and LineBreak. |
| JustifiedSpaceExtension | Gets or sets the maximum white space extension factor before applying extension to other characters when text is justified.
Valid values are from 0 to 10000. The default is 2.5. |
| JustifiedSpaceShrinking | Gets or sets the white space shrinking factor when text is justified.
Valid values are from 0.0 to 1.0. The default is 0.2. |
| JustifiedTextExtension | Gets or sets the maximum text extension factor when text is justified.
Valid values are from 0 to 10000. The default is 0.3. |
| JustifyLastLine | Gets or sets a value indicating whether for paragraphs that have TextAlignment set to TextAlignment.Distributed, the last line will be justified (typical in East Asian typography).
This property has effect only for horizontal text, and only if TextExtensionStrategy is set to TextExtensionStrategy.EastAsianExcel or TextExtensionStrategy.Excel. The default is false. |
| LastLineIsEndOfParagraph | Gets or sets a value indicating whether the last line of text is the end of paragraph. The default is true. |
| LayoutPerformed | Gets a value indicating if PerformLayout method was executed at least once. |
| LineBreakingRules | Gets or sets a value specifying the line breaking algorithm.
The default is LineBreakingRules.Unicode. |
| LineGapBeforeFirstLine | Gets or sets a value indicating whether the typographic line gap should be added before the first line of text. The default is false. |
| Lines | Gets the list of text lines after executing the PerformLayout method. |
| LinesBetweenConsecutiveHyphens | Gets or sets the minimum number of lines not using hyphens after breaking a word across lines and displaying a visible hyphen at the position of soft hyphen.
The default is zero. |
| LineSpacingScaleFactor | Gets or sets the scaling factor to be applied to the computed line height.
Valid values are from 0 to 1000. The default is 1. |
| MarginAll | Gets or sets all margins of the layout box, in graphic units.
Returns null if the margins have different values. |
| MarginBottom | Gets or sets the bottom margin of the layout box, in graphic units. |
| MarginLeft | Gets or sets the left margin of the layout box, in graphic units. |
| MarginRight | Gets or sets the right margin of the layout box, in graphic units. |
| MarginTop | Gets or sets the top margin of the layout box, in graphic units. |
| MaxHeight | Gets or sets the height of the layout box, in graphic units. |
| MaxLastLineOverflowFactor | Gets or sets the maximum fraction of the last line's height overflowing beyond the layout bounds for that line not to be truncated. The default is 0 (last line must completely fit within the layout bounds). Valid values are from 0 to 1. This property does not affect values returned by ContentHeightFitsInBounds or ContentWidthFitsInBounds. This property is ignored if ObjectRects is not null. |
| MaxWidth | Gets or sets the width of the layout box, in graphic units. |
| MinimalLineSpacing | Gets or sets the explicit minimal distance between lines, in graphic units. |
| NoExcelAlignment | Gets or sets a value indicating whether justified or distributed text alignment should be applied as if the SimplifiedWordBreak is always false. In other words, when this property is set to true the value of SimplifiedWordBreak does not affect the text alignment rules, it affects only the line breaking behavior.
The default is false. |
| ObjectRects | Gets or sets the list of areas occupied by embedded objects. |
| ParagraphAlignment | Gets or sets the alignment of paragraphs along the flow direction axis. |
| ParagraphSpacing | Gets or sets the additional spacing between paragraphs, in graphic units. |
| Resolution | Gets or sets the resolution (graphic units per inch) used by the current text layout. |
| RestrictedFontLookup | Gets or sets a value indicating whether the fonts should be searched in the custom collection only, if any specified. The default is false. |
| RightToLeft | Gets or sets the base direction for horizontal and sideways text. The default is false. |
| RotateSidewaysCounterclockwise | Gets or sets a value indicating whether sideways text should be rotated counterclockwise. The default is false. |
| RowHeight | Gets or sets the height of the layout box measured from the top margin (for positive values) or from the bottom margin (for negative values), in graphic units. |
| ScriptCodes | Gets the array of ScriptCode's, one for each code point. |
| ScriptTags | Gets the array of ScriptTag's, one for each code point. |
| SimplifiedAlignment | Gets or sets a value indicating whether to use simplified text alignment rules. In particular, the same rules will be applied to narrow and wide (East Asian) characters.
This property has effect only for horizontal text, and only if SimplifiedWordBreak is true and NoExcelAlignment is false. The default is false. |
| SimplifiedWordBreak | Gets or sets a value indicating whether to use simplified rules when determining word boundaries and line breaks.
Setting this property to true prevents word breaking on certain non-whitespace characters to make word breaking behavior similar to that of MS Excel. The default is false. |
| SoftHyphenReplacementCharCode | Gets or sets a UTF-32 character code used as replacement for soft hyphen characters (0x00AD) at ends of lines when breaking words across lines.
The default is 0x002D (the Unicode hyphen-minus character). Setting this to 0 breaks words without showing any visible hyphen character. Setting this to -1 prevents breaking words at soft hyphens. Note that if this property is changed, either RecalculateGlyphs or PerformLayout with true as the parameter must be called for the changes to be processed correctly. |
| SplitCodePointIndex | Gets the first code point index of the current split rest, if this TextLayout contains the rest lines after calling the Split or SplitAndBalance methods. |
| SuppressShaping | Gets or sets a value indicating if shaping and positioning of graphemes should be skipped for the sake of speed. The default is false. |
| TabStops | Gets or sets the list of tab stops. |
| TextAlignment | Gets or sets the alignment of text along the reading direction axis. |
| TextExtensionStrategy | Gets or sets a value specifying the rules used for justified text extension. If LineBreakingRules is LineBreakingRules.Simplified, this property also affects the rules used for line breaking.
The default is Default. |
| TrimmingGranularity | Gets or sets the text granularity used to trim text overflowing the layout box. |
| UniformLineSpacing | Gets or sets the explicit distance between lines, in graphic units. |
| UseEmbeddableFonts | Gets or sets a value indicating if the linked and fallback fonts have to be embeddable. The default is false. |
| UseOldScriptTags | Gets or sets a value indicating whether the following scripts should use their old tags: Bengali, Devanagari, Gujarati, Gurmukhi, Kannada, Malayalam, Myanmar, Odia, Tamil, Telugu. The default is false. |
| VerticalDirection | Gets a value indicating whether the FlowDirection was vertical when RecalculateGlyphs was last called. |
| WordBoundaryRules | Gets or sets a value specifying the word breaking algorithm.
The default is WordBoundaryRules.Unicode. |
| WrapMode | Gets or sets a value specifying how text lines are broken to avoid text overflowing the layout box. |